onto the item by environmentally protected decalcomania transfer, a metal
wrap-around tag, stenciling, silk screening, or by any other method suitable
life
for the use intended. Marking shall be as permanent as the normal
expectancy of the item to which they are applied and shall be capable of
withstanding the environmental test and cleaning procedures specified for the
item.
3.10.2 Lubrication plate. A corrosion resistant lubrication plate shall be
Unless otherwise specified (see 6.2.1),
securely attached to each machine.
the plate shall contain the following information:
Points of lubricant application
Servicing interval
Type of lubricant
Viscosity
A corrosion resistant nameplate shall be
securely
3.10.3 Nameplate.
attached to each machine. Unless otherwise specified (see 6.2.1), the
nameplate shall contain the information listed below. If the machine is a
special model, the model designation shall include the model of the basic
standard machine and a suffix identified in the manufacturer's permanent
The captions listed may be shortened or abbreviated, provided the
records.
entry for each caption is clear as to its identity.
Nomenclature
Manufacturer's name
Manufacturer's model designation
Manufacturer's serial number
Power input (volts, total amps, phase, frequency)
Contract Number or Order Number
National Stock Number or Plant Equipment Code
Date of manufacture
3.11 Technical data. When technical data is required it shall be furnished
in accordance with the requirements of the contract.
All technical data
furnished shall be written in the English language.
3.12 Workmanship. Workmanship of the machine and accessories shall meet
all requirements specified herein and shall be of a quality equal to that of
the manufacturer's commercial equipment of the type specified herein.
QUALITY ASSURANCE PROVISIONS
4.
the
4.1 Responsibility for inspections. Unless otherwise specified in
contract or purchase order, the contractor is responsible for the performance
otherwise
specified herein. Except as
of all inspection requirements
specified in the contract or purchase order, the contractor may use his own or
inspection
any other facilities suitable for
the performance of the
requirements specified herein, unless disapproved by the Government. The
Government reserves the right to perform any inspections set forth in the
specification where such inspections are deemed necessary to assure supplies
and services conform to prescribed requirements.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business