MIL-P-80054D
3.11.1 Lubrication plate. A corrosion resistance lubrication plate shall
be securely attached to each machine. The plate shall contain the following
information:
Points of lubricant application
Service interval
Type of lubricant
viscosity
3.11.2 Nameplate. A corrosion resistance nameplate shall be securely
attached to each machine, The nameplate shall contain the information listed
below. If the machine is a special model, the model designation shall include
the model of the basic standard machine and a suffix identified in the
manufacturer's permanent records. The captions listed may be shortened or
abbreviated, provided the entry for each caption is clear as to its identity.
Nomenclature
Manufacturer's name
Manufacturer's model designation
Manufacturer's serial number
Power input (volts, total amps, phase, frequency)
Contract Number or Order Number
National Stock Number or Plant Equipment Code
Date of manufacture
3.12 Technical data. When technical data is required it shall be furnished
in accordance with he requirements of the contract. All technical data fur-
nished shall be written in the English language.
4. QUALITY ASSURANCE PROVISIONS
4.1 Responsibility for inspections. Unless otherwise specified in the con-
tract or purchase order, the contractor is responsible for the performance of
all inspection requirements specified herein. Except as otherwise specified
in the contract or purchase order, the contractor may use his own or any other
facilities suitable for the performance of the inspection requirements
specified herein, unless disapproved by the Government. The Government
reserves the right to perform any inspections set forth in the specification
where such inspections are deemed necessary to assure supplies and services
conform to prescribed requirements.
4.1.1 Responsibility for compliance. All items must meet all requirements
he inspection set forth in this specification shall be-
of sections 3 and 5.
come a part of the contractor's overall inspection system or quality program.
The absence of any inspection requirements in the specification shall not re-
lieve the contractor of the responsibility of assuring that all products or
supplies submitted to the Government for acceptance comply with all
16
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business