MIL-P-45042F
under coping capacity in table I shall be coped.
4.8.3.5 Structural sha pe shearing test.
The machine shall be set up for
structural shape shearing operations. Not less than one each of the specified
shapes of the maximum sizes specified in table I shall be sheared. Angle iron
shapes shall be sheared at 90 degrees and mitered at angles of 15 degrees,
30 degrees and 45 degrees both leg up and leg down. The quality of the `drop-
off" structural angle cuts shall conform with 3.4.7.
4.8.6 Environmental protection certification of conformance. The con-
tractor shall certify and maintain substantiating evidence that the product
offered complies with all environmental protection restrictions as required in
3.2.8. The Government reserves the right to require proof of such conformance
prior to first delivery and thereafter as may be otherwise provided for under
the provisions of the contract.
4.8.7 Electromagnetic interference control test. Equipment requiring
electromagnetic Interference control shall be tested for compliance with 3.3.8
using the procedures given in MIL-STD-462.
4.9 Packaging inspection. Packaging of each item shall be inspected to
determine compliance with the requirements of section 5.
PACKAGING
5.
The requirements for packaging shall be in
5.1 Packaging requirements.
accordance with MIL-M-18058.
NOTES
6.
(This section contains Information of a general or explanatory nature that
may be helpful, but is not mandatory.)
14
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business